Unitized
Wheels and Mandrels
| UNITIZED WHEELS are very handy & give a great finish to aluminum
& cast iron. Constructed
of abrasive impregnated woven material rolled into tightly compressed
1x1 solid wheels with a 3/16 hole.
Used to deburr, clean, blend & polish all materials.
We use them to polish & blend sharp edges below valve seats,
short side radiuses, valve bowls & to highly polish combustion
chambers if you so choose. We
recommend our 2010 porting lube when using on aluminum.
Available in med. & hard density; singly or 10 packs. Hard density is more aggressive but still leaves a smooth
finish. |
UW-Series
Unitized Wheels mounted and unmounted use with the CBM2 ($6.00)
Universal mandrel shown
|
| UNITIZED
WHEELS |
| Part Number |
Product
Description |
Price, each |
Price, 10
pack |
| UW1 |
1x1x3/16 med. density/fine
finish in Aluminum Oxide |
$3.50 |
$29.00 |
| UW2 |
Same as above in Silicon Carbide |
$3.50 |
$29.00 |
| UW3 |
1x1x3/16 hard density/
med. finish in Aluminum Oxide |
$3.75 |
$32.00 |
| Part Number |
Product
Description |
Price, each |
| UWM1 |
1X3/16 screw mandrel 1/4-20
thread (to be used with CBM2 4 long mandrel) |
$8.00
|
| UWM2 |
1X 3/16 screw mandrel 7/8
long w/ 1/4 shank |
$5.00 |
| Unitized
Mounted Wheels |
| Unitized
Mounted Wheels are same as unitized
wheels but dome shaped & fixed on 1-7/16 x 1/4
diameter
shafts.
|
| Unitized
Mounted Wheels |
| Part Number |
Product
Description |
Price |
| MW1 |
1X1X1/4 med. density/fine
finish in Aluminum Oxide |
$8.00 |
| MW2 |
Same as above in Silicon Carbide |
$8.00 |
| MW3 |
1x1x1/4 hard density/ med.
finish in Aluminum Oxide |
$8.00 |
|
Joe Mondello
Mondello Tech Center
2470 Pomona Road
Crossville TN 38571
931-459-2760
888-MONDELLO
(888-666-3355)
|
All rights reserved.
Mondelloฎ and all contents of this website
are copyrighted and owned by Joe Mondello.
|
|
|