Miscellaneous
porting stones
| Stones
specially formulated by Mondello in aluminum oxide &
silicon carbide are designed to make your final surface conditioning
finishes quicker & easier. They
allow you to maintain better shapes & smoother finishes when used
right after carbide cutting & shaping is finished.
They remove carbide chatter quicker than a cartridge roll & can
control your port shape, radiuses, high & low spots much easier. Your final polishing will be much faster leaving a better,
smoother final finish. Always
use our SD-240 & DS-3 to shape & smooth your stones for a better
finish & longer stone life. Each stone has a brief description of
where we use it in our work. Our
stones are for use on cast iron & steel only. |
|
Miscellaneous
porting stones |
| STONES | ||
| Part Number | Product Description | Price |
| A6 |
Semi hard 3/4”D X 1-1/4”L round
nose tree shaped stone on 1&1/2” shank for grinding below |
$3.50 |
| A38 |
Hard 1”D X 1”L cupped stone on1&1/2”shank used to grind floors & walls of cast iron combustion chambers |
$3.00 |
| W185 | Hard 1/2”D X 1/2”L stone on 1-1/2”shank for use on cast iron to clean up small casting divots in combustion chambers | $2.50 |
| W185-3 | Same as W-185 on 3” shank used to clean up spark plug area on cast iron heads | $2.75 |
| W187 |
Hard stone 1/2”DX1”L on4” shank used to stone all areas of intake & exhaust ports, chambers, guides, etc. on cast iron heads. Use SD-240 to shape stones to fit all areas & DS-3 to smooth out rough edges of stones |
$2.75 |
| W190 | Same as W187 except it has 6” shank | $4.35 |
| W206 |
Hard stone 3/4”LX1”D on 4” shank used in valve
bowls, large intake & exhaust runners, |
$3.75 |
|
SD240
Stone Wheel Dresser & DS3 & 6 Dressing Sticks |
| Shaping
& dressing aids for stones |
||
| Part Number | Product Description | Price |
| DS3 | 1” x 1” x 3” stone dressing stick | $3.00 |
| DS6 | 1” X1 “X 6” stone dressing stick | $6.00 |
| SD240 | Desmond O steel wheel dresser to shape your stones | $16.00 |
| SDW250 | Replacement steel wheel for SD-240 dresser | $6.00 |
| ZA12 | Zinc alloy for filling heat riser passages in early heads. You need a cast iron ladle & natural or propane gas burner to heat this product to 810°, stirring for 2 minutes to mix well before pouring into the area you want filled. You only have one chance. Do not under fill the area; it will not stick to previously poured ZA-12. | $5.00/lb. |
Mondello Tech Center 2470 Pomona Road Crossville TN 38571 931-459-2760 888-MONDELLO (888-666-3355) |
Mondello® and all contents of this website are copyrighted and owned by Joe Mondello. |
|
