Now all carbide cutters are available cut in the safe nose or NN Series (no teeth on end of nose) for only an additional $5.00. Tell us at order time & they can be done & shipped within a day!!

Mondello cutters are the best carbides available.  Made of American C2 carbide blanks designed by Joe Mondello to save you porting time. Our angle, relief, helix, spacing & tooth count patterns have taken years to develop.  We use a code to describe our carbide cutters.  The first symbols are usually acronyms of the shapes i.e. BST for barrel shaped taper & RT for reverse teardrop.  If there is a dash between letters i.e. FM-SE that is a Fast Mill Cut (most aggressive) on an egg/oval shaped cutter.  NN-SH means no teeth on nose (safe nose) on flame shape.  The number following the letters denotes cutter diameter size: 1=1/4”; 2=5/16”; 3=3/8”; 4=7/16”; 5=1/2”; 6=5/8”; 7=3/4”.  

The number after the first dash (-) denotes length of shank i.e. 4=4” shank; 6=6”; 8=8” etc.  The number following second dash denotes number of teeth on cutter; letters at end are RC= regular cut; DC= double cut (criss-crossed cutting teeth). NN-SF5-4-16-DC is a safe nose (no teeth on nose) round nose tree shape 1/2” carbide cutter with 16 teeth double cut (criss-cross design) on a 4” shank. (See first box chart for code) Tooth count for aluminum or cast iron carbides is Regular, Intermediate, Aggressive & Fast Mill (for aluminum) cuts. (See second box chart). Combinations not listed are special order items.  Call to place order & for sharpening details.  Check out our newest addition; the Flegg FL-Series a cross between the flame & egg or oval shape.